Electrical Wire Tracing Function
1. Directly insert RJ11 of crocodile clip into RJ11 port of emitter,
connect telephone line with the clamp.
2. Push DIP switch on emitter to “SCAN” position. Wire locator
indicator “STATUS” will flash, which indicates normal operation of
emitter.
3. While using the probe, press the inching button on receiver to find
target wire.
4. During testing, to switch testing over to dual-tone, press “Switch”
button.
Connect emitter with
telephone line to be located
No need for electrical drill.
Quickly find or trace the correct wire among many with-
out the trouble of a multimeter.
04
03
Note
: The equipment is prohibited to be used on heavy-current wires.
Networking Cable Tracing Function
1. Directly insert networking cable with RJ45 plug into RJ45 port of
emitter.
2. Push DIP switch on emitter to “SCAN” position. Wire locator
indicator “STATUS” will flash, which indicates normal operation of
emitter.
3. While using the probe, press the inching button on receiver to find
target wire.
4. During testing, to switch testing over to dual-tone, press “Switch”
button.
EX
AM
PL
E
1
Fi
nd
in
g
wi
re
o
n
ro
ut
er
Connect emitter with
telephone line to be located
Trace cable with receiver at
the other end
Connect emitter with
telephone line to be located
Trace cable with receiver at
the other end
EX
AM
PL
E
2
Fi
nd
in
g
wi
re
o
n
ne
t b
ar
