1.
D
RIVESHAFT
-
The driveshaft comes not greased, so must be done before sprayer is put
into use. After that, grease
every 50 hours
. It is also necessary, from time to time, to
untelescope the driveshaft to clean and re-grease tubings.
2.
T
RANSMISSION
-
Observe the sight gauge, and install 90 weight transmission oil when
necessary.
3.
P
UMP
-
The clear oil reservoir should be filled to the indicator mark. If oil is low, add
engine oil, non-foaming, non-detergent 30 weight oil. The pump oil must be changed
after the first 100 running hours and then at the end of every working season.
(See pump
page for more details.)
GENERAL MAINTENANCE
Carefully follow all instructions as stated in this operators manual. This includes lubrication,
maintenance and operation of the sprayer. The sprayer was designed and built for years of
reliable service if properly cared for. However, an air blast sprayer is a high R.P.M. machine,
thus, daily attention is required.
1.
Check all bolts for tightness.
2.
Check sprayer for leaks.
LUBRICATION
Page 3
Summary of Contents for APL200
