The pump does not
One or more valves are
Examine the valve seatings and
draw water.
seating improperly.
clean them.
Suction line is plugged
Examine suction line. Clean
or collapsed. Clogged
strainer.
strainer.
Pressure gauge fluctuates
The pump is sucking in
Examine the suction hose and
excessively.
air through the suction
make sure it is firmly secured.
union or air has not been
Run the pump with the outlet
entirely evacuated from
hose open to evacuate air from
the pump.
the pump.
The liquid flow is
One or more valves are
Examine the valve seatings and
irregular.
seating improperly.
clean them.
Output drops and the
Oil level is too low.
Add oil to correct level (halfway
pump is noisy.
up the sight tube).
Oil comes out of the
One or more diaphragms
Drain the pump of oil.
discharge port.
split.
Dismantle the heads and fit
new diaphragms. Fill to correct
oil level with motor oil (30W).
Water is pumped at
The sealing valve on the
Replace washer and, if necessary,
little or no pressure.
pressure control valve
the valve seat.
is worn.
TROUBLESHOOTING
Page 8
PROBLEM: CAUSE: REMEDY:
Summary of Contents for GDL200
