INTRODUCTION
Page 1
We welcome you as an owner of the Gearmore 3-point hitch sprayer. Before you read on to the
operation and maintenance of the sprayer, please read the following general information.
1.
POWER SOURCE:
The sprayer is designed to mount to any 540 RPM tractor with a
3-point hitch. The horsepower required will vary depending on the pressure setting of
the control valve.
2.
PUMP:
The pump on the sprayer is a diaphragm pump. Pistons power the diaphragms
that pump the liquid. The unit has protection against corrosion, as the valves are stainless
steel.
3.
TANK:
The tank comes with a jet agitation system. It also has a sump, so the tank can be
completely drained.
4.
STRAINERS:
The sprayer is equipped with three strainers. A large filter screen is located
under the tank cover. A main strainer located by the side of the pump and a strainer screen
in every nozzle assembly. All strainers are easily accessible for cleaning.
5.
TRANSMISSION (Optional on GDL units):
If your sprayer has an air blast fan, then
it will have a special single speed transmission with neutral. Speed one and neutral are
indicated by the decal on the machine. Neutral is for when you want to use your sprayer
for handgun spraying and thus, the fan will not be turning.
6.
BLOWER (Optional on GDL units):
Air is supplied by an 8 blade propeller. The fan is
made of a special high strength plastic alloy and precision balanced for smoother operation.
The whole fan assembly is protected by heavy wire mesh screening. However, special care
should be taken when working around the blower.
7.
NOZZLES (Optional on GDL units):
The air blast fan assembly is equipped with
special ceramic nozzle tips that can be changed for different gallonage requirements. The
nozzles can be shut off individually by turning 90 degrees.
Summary of Contents for GDL200
