ASSEMBLY
8
HOW TO ASSEMBLE - STEP BY STEP (Continued):
STEP 13:
With 22 x 80 bolts and M22 self-locking
nuts, bolt the tongue and support brace in place.
STEP 14:
Set the telescopic axle with its 8 x 40
bolt and M8 wing nut as shown.
STEP 15 very important!:
Set the output
shaft into the spreading disc, then drive 1 ea. 8 x 40
and 1 ea. 5 x 40 pins into the agitator, BEFORE
setting the shaft into the gearbox.
STEP 16:
Set the assembled disc into the
gearbox.
Summary of Contents for PTP180-P
Page 14: ...SPREADING CHART 12...
Page 20: ...PARTS BREAKDOWN 18...
Page 21: ...PARTS BREAKDOWN 19...
