LUBRICATION & SERVICE
15
Before every use and after every 8 hours of effective work, carry out the greasing of the machine.
Make sure the greasing zerks are well cleaned from mud or
other residuals before using them to inject lubricating grease.
Lubricate with lithium grease the points, shown in the picture.
Point to grease
REPLACEMENT OF THE SPREADER VANES
In case the spreading vanes of the disc break or get damaged, it is necessary to replace them with
new ones.
Unscrew the nut and replace the damaged vane.
The fi xing items (nuts and bolts) must be of the same type as those provided from the manufacturer.
Summary of Contents for PTP180-P
Page 14: ...SPREADING CHART 12...
Page 20: ...PARTS BREAKDOWN 18...
Page 21: ...PARTS BREAKDOWN 19...