ASSEMBLY
7
HOW TO ASSEMBLE - STEP BY STEP (Continued):
STEP 7:
Set the input-drive key (8mm dia.) into
the right shaft.
STEP 8:
Tighten the gearbox with the 4 bolts
(10 x 100) and their M10 self-locking nuts.
STEP 9:
Set the 5 x 40 pin as shown.
STEP 10:
Lay the frame as shown.
STEP 11:
Set the axle frame on the hopper
frame, tightening it with the 4 ea. 10 x 70 bolts, the
4 ea. 10 x 20 washers and the 4 ea. 10 x 30 nuts.
STEP 12:
Set the wheels in the axle with 8 x 50
bolts and M8 self-locking nuts.
Summary of Contents for PTP180-P
Page 14: ...SPREADING CHART 12...
Page 20: ...PARTS BREAKDOWN 18...
Page 21: ...PARTS BREAKDOWN 19...