STOP
Program 6
Entering a pass code
Keypad
Enter 4 or 5 digit
pass code
button
push
sound signal
1x long
Before the actual pass code, you can press any other keys to prevent fraud.
If an incorrect pass code is entered, you will hear a sound signal (3 beeps).
Entering a new pass code is only possible after the lock-out period (factory: 20 sec.) which end is
signalled by a long sound signal.
A correct code is detected, the corresponding relay is switched!
Program 5
Changing the control time - lock-out time
Enter 8 digit
mastercode
Enter 3 digit
time 001-255
The modified lock-out time is saved!
*Lock out time:
dynamic
= The lock-out time is extended by 10 sec. with
every wrong entry (max. 255 sec.)
static
= The lock-out time is according the set time( 000 = turned off)
= dynamic*
= static*
button
push
button
push
sound signal
1x long
sound signal
1x long
sound signal
2x long
push
button
button
button
push
push
Program 4
Changing the control time / Tiptomatic time
Enter 8 digit
mastercode
The modified Tiptomatic time is saved!
This set time is the same for all relays (factory 60 sec.).
Enter 3 digit
time 001-255
push
button
push
button
push
button
push
button
sound signal
2x long
sound signal
1x long
push
push
push
button
button
button
Keypad
