GeBe 190103, Manual

20

English

indicated on the lubricant containers. After use, 

wash yourself thoroughly. Treat lubricants used in 

accordance with the provisions of anti-pollu- tion 

law.

-  At the end of the maintenance and repair, before 

restarting the machine, make sure that the work is 

completed, the safety devices are reactivated and 

guards are replaced.

-  Never touch the moving parts or interpose 

between them keeping a safe distance.

-  Periodically check the tightness of the screws and 

the nuts.

-  It is absolutely forbidden to remove or tamper with 

the safety devices.

-  Machine maintenance must only be carried out 

with the tractor unplugged, by qualified person- 

nel and following the instructions given in this 

Manual and in the attached manuals.

-  Do not start and/or work on the generator with 

wet hands or feet to avoid possible shocks caused 

by electrocution.

-  Before any maintenance operation, make sure 

that no accidental starting of the Generator Set is 

possible.

-  Do not touch the alternator with your limbs when 

the generator is running or is still hot.

-  The presence of people equipped with pacemakers 

(or other medical devices) in the vicinity of the 

generator is strictly prohibited due to possible 

electromagnetic interference on cardio-circu- 

latory devices.

-  It is absolutely forbidden to leave flammable 

liquids or rags soaked in flammable liquid on or 

near the generator.

-  As a precaution, in the unfortunate event of fire or 

accident, keep a powder extinguisher and a first 

aid kit near the machine. Periodically check the 

contents of the kit and restore if necessary.

-  Do not put out any flames on the machine with 

water.

-  Prepare a list of emergency telephone numbers to 

be used in the event of an accident.

-  Do not leave the Generator Set exposed to heat 

sources, humidity and bad weather.

-  Keep electrical cables and connections in good 

condition. Using equipment in poor condition can 

lead to electrocution and equipment damage.

-  Do not use faulty or temporarily badly insulated 

cables.

-  It is absolutely forbidden to carry out any 

operation on live parts that are normally not 

accessible. It is absolutely mandatory, before any 

intervention on the generator, to stop the tractor, 

detach the cardan shaft and wait for all the moving 

parts to stop.

DANGER

The generator is a machine that, if used correctly, 

provides a useful service; if, vice ver- sa, it is used 

clumsily and superficially, it can be dangerous in 

particular due to the fact that the generator is a 

producer of electricity with all the annexes and 

connected items.

ELECTRIC SHOCK CAN CAUSE SERIOUS DAMAGE 

AND EVEN DEATH.

Failure to comply with what is shown in Section 

«2. Safety and Prevention» and any tampering of 

the safety devices, relieve the Manufacturer from 

any responsibility in case of accidents, damage or 

malfunctions of the machine.

3. TRANSPORTATION AND HANDLIG

3.1 HANDLING OF THE GENERATOR

Usually, the Generator Set is shipped wrapped in 

a plastic bubble wrap, fixed on a pallet with plastic 

strap, which can be easily moved by forklift (Fig. 3) 

or pallet truck. Should the need to make transfers 

arise, the Generator Set of the

«G-THOR» range can be easily loaded on suitable 

vehicles, or unloaded, using a normal forklift truck as 

shown in Fig. 3.

DANGER

Handling operations (loading/unloading) can be very 

dangerous if not carried out with the utmost care.

Therefore, before starting the unloading, remove 

the unauthorized persons; clear and delimit the area 

in which the operation takes place, and check the 

integrity and suit- ability of the lifting and transport 

means available. It must also be ensured that the