Status LED on the lateral control panel
The status LED on the lateral control panel informs you of the current device status.
LED
Description
Flashes blue
The device initialises after switching on. A system flush is performed.
Lights up blue
A user was recognised and water heating is activated in the basic
settings. The LED switches off in economy mode.
Does not light up
(no user)
Economy mode is active or the device is switched off.
Does not light up
(during use)
Water heating and WC seat ring heating were deactivated in the basic
settings.
Lights up green
The ceramic honeycomb filter must be replaced. → See "Replace the
ceramic honeycomb filter", page 38.
Flashes blue-red The device must be descaled. → See "Descale the device", page 40.
Flashes red
Malfunction message → See "The shower toilet is without function",
page 44.
Flashes blue-red
and lights up
orange
The device is blocked and urgently needs to be descaled. The spray
functionalities cannot be used when blocked. The block can be reset for 1
shower cycle. To implement this, the <Shower> button must be pressed
for 5 seconds.
Lights up orange
The device is now descaling. It is not possible to use the shower toilet for
the duration of the descaling procedure.
Flashes orange
Water replacement is being carried out. → See "Automatic water
replacement", page 33.
Flashes red and
orange at the
same time
The descaling function has failed and is waiting for a command from the
user.
54043197308479499 © 09-2019
967.258.00.0(03)
15
