12
Keyswitchmachine Long press the on / off; short press the on / off screen
13
Horn
Voice broadcast;
14
Infrared light
In the case of the lighting is not ideal, can choose to open
15
microphone
The tape receiving port;
16
reset button
System restart reset button;
Recorder Installed
1, insert a memory card: please follow the device memory card gap suggeststhe right direction insert a memory
card, press the memory card until thecracking of a, is inserted in place so far.
The recorder video storage of high speed card, pay attention to the memory card must be high speed card
(above CLASS6).
Note: the new card used for the first time on the card format, please use this machine.
2, remove the memory card: according to the memory cardslot, pop.
Note: the equipment in the boot state, do not remove or insert the memory card, so as not to damage the
memory card.
3, the installation in the vehicle rearview mirror in front of the windshield.
To determine the 3M adhesive buckle installation location specific, tear offsticker and put it firmly pasted on the
windscreen on the.
The product host behind holes at the 3M adhesive buckle claws, the downward force will be fixed on the buckle
machine.
4, connect the power supply
The first scene product has the unique design and power supplyprinciple, we provide two kinds of feasible
scheme for consumers:
1 if the need to connect the DVD vehicle navigation equipment, can get the power from the car ACC circuit
through a dedicated step-down video line, and the AV interface and navigation video interface connection. This
way of use need professional construction personnel to operate, non professionalsdo not unauthorized
modification, Install wiring way suggested reference.
