2. Press the
key to switch to the playback mode, the upper left corner of the screen to display the
playback
iron.
3. Press
key up or down to select the file.
4. Press the OK button to play the selected video file ; short press again to pause playback.
Menu setting operation
1, if you are recording, need to press the OK button to stop recording.
2. Short press once to
M
ring up the setup menu, twice on the menu page.
3, by a short press or key, you can cycle up and down to select items in each set.
4. Select the settings you want to change, press the OK button to enter the changes through short.
5. After setting short key
M
to exit standby mode.
Special features:
1, gravity sensor function
When the gravity acceleration starts, the machine will automatically save the video when the accident
occurred was not delete the file.
Gravity sensor can be adjusted in the menu high - medium - low, medium factory default.
2, file locking feature
The imaging process, the
key is pressed, the machine will not delete the current video is saved as a file.
3, parking guard function
1) parking guards opened, when the vehicle stalled, tachograph into the automatic shutdown procedures,
body if you receive external vibration generated by the tachograph will open the camera, automatically shut
down after a record 10-15 seconds ; when the body is detected again after the shock, again start camera
function.
2) Parking for guarding video camera 1080P 30 frames / sec, and the file is automatically locked.
Note: The parking guard function must only work in the case of tachograph automatic shutdown, manual startup
or shutdown, the parking guard does not work.
4,
motion detection function;
If the motion detection after a short press OK to start recording 10 seconds after the camera automatically
switches to standby mode motion detection, motion detection standby mode, the upper left corner of the
screen there is a flashing yellow dots, when an object is detected when moving, the recorder start recording,
the yellow flashing light spot becomes red spot ; motion detection start time of 10-30 seconds after the end
of the motion detection motion detection machine automatically enters standby mode, the upper left corner
of the screen to switch to the yellow dot flashes; when once again detects moving objects, the camera
function starts again!
When the G-sensor gravity sensor starts, the key icon will appear on the screen indicates the current video
is locked video ;
5, USB mode
The USB line is connected to the computer, the recorder will automatically pop up the USB menu, there will be
the following options:
1) disk
Access in this mode can be video or photo file.
