11
in.terface
Audio/video in.terface connection shown above
powering the unit
Powering the in.terface
Simply connect the in.terface to the Aeware spa pack (in.xm).
See the illustration opposite.
You do not need to turn off the power before connecting the
in.terface to the Aeware spa pack (in.xm). But if you use the
auxiliary keypad in.terface, you will need to reset the Aeware spa
pack (in.xm) after completion of the installation.
Note:
Before powering the Aeware spa pack (in.xm), make sure all
accessories are linked to the bonding connector and connected to
the spa pack. Make sure also that the spa pack door is closed.
Then turn on the breaker.
For more details, please refer to the Aeware spa pack (in.xm)
techbook.
Summary of Contents for Aeware in.terface
Page 1: ......