LOCATION AND USE
5
The Insect Trapper is best located
away from
human activity
and
hung at a height of
around 2.5 metres (Figure 2)
. It is
recommended that the appliance be used
continuously when people and pets are
present.
Ensure the unit is
placed away from other
light sources (Figure 3)
. Keep away from the
reach of small children or hang using the
attached hanging ring. Connect the plug to a
suitable power supply, corresponding to that of
the appliance, 230VAC 50/60Hz, 15W. For
hanging use, an extension cord may be
necessary. This appliance is weatherproof and
can be left outdoors.
The Insect Trapper is fitted with a
daylight
(auto on-off) sensor
, located on the top of the
unit. The sensor is around 75mm from the
hanging ring. Ensure the sensor is not
obstructed in any way. When hanging the
trapper, ensure it has around 300mm clearance
from its top and any flat surface above it (for
example eaves). Do not hang the unit near
other light sources. To activate the Auto On-Off
feature, switch the unit to Auto, using the
switch located just below the top of the unit
(Figure 4).
Switch to On to use the unit
regardless of surrounding light conditions.
Insect Trapper
Always check that the appliance is in good
working condition and all guards are secure.
Check the power supply cord and plug
regularly for damage. When not in use or
before cleaning, always disconnect the
appliance from the mains supply.
Ensure unit is not located near competing light sources -
min 5 metres recommended.
To ensure Auto Sensor works correctly, allow at least
300mm clearance if hanging below a flat surface
Ideal hanging height 2.5m
ON
AUTO
Full time on
Auto on-off (on at sunset, off at sunrise)
Figure 2
Figure 3
Figure 4