MANUAL BCSI-1 REV 1.8 EN.DOC
19.12.08
A.J.
- 17 -
Programming BCSi
Presettings done by Gecma Components GmbH (indicated by “*”).
Presettings done by Gecma Components GmbH (indicated by “*”).
Presettings done by Gecma Components GmbH (indicated by “*”).
Presettings done by Gecma Components GmbH (indicated by “*”).
Don’t scale or modify the barcodes.
Don’t scale or modify the barcodes.
Don’t scale or modify the barcodes.
Don’t scale or modify the barcodes.
We recommend to program “Set Default Parameter” only.
We recommend to program “Set Default Parameter” only.
We recommend to program “Set Default Parameter” only.
We recommend to program “Set Default Parameter” only.
Changes/adjustments are under owner’s responsibility.
Changes/adjustments are under owner’s responsibility.
Changes/adjustments are under owner’s responsibility.
Changes/adjustments are under owner’s responsibility.
Set Default Parameter
Set Default Parameter
Set Default Parameter
Set Default Parameter
Scan this bar code to return all parameters to the default values
Set all default
Focus Mode
Focus Mode
Focus Mode
Focus Mode
Select the Focus Mode to control the working range of the BCSi. If Far Focus
Far Focus
Far Focus
Far Focus is selected, the BCSi is optimized to
read at its far position. With Near Focus
Near Focus
Near Focus
Near Focus, the BCSi is optimized to read at its near position. Smart Focus
Smart Focus
Smart Focus
Smart Focus toggles the
focus position after every frame.
* Far Focus
Near Focus
Smart Focus