MANUAL BCSI-1 REV 1.8 EN.DOC
19.12.08
A.J.
- 18 -
Decoding Illumination
Decoding Illumination
Decoding Illumination
Decoding Illumination
Selecting Enable Illumination causes the decoder to flash illumination on every image capture to aid decoding.
Select Disable Illumination to prevent the decoder from using decoding illumination.
Enabling illumination usually results in superior images. The effectiveness of the illumination decreases as the
distance to the target increases.
* Enable Decoding Illumination
Disable Decoding Illunmination
Decode Aiming Pattern
Decode Aiming Pattern
Decode Aiming Pattern
Decode Aiming Pattern
This parameter only applies when in Decode Mode. Select Enable Decode A
Enable Decode A
Enable Decode A
Enable Decode Aiming Pattern
iming Pattern
iming Pattern
iming Pattern to project the aiming
pattern during bar code capture, or Disable Decode Aiming Pattern
Disable Decode Aiming Pattern
Disable Decode Aiming Pattern
Disable Decode Aiming Pattern to turn the aiming pattern off.
* Enable Decode Aiming Pattern
Disable Decode Aiming Pattern