MANUAL BCSI-1 REV 1.8 EN.DOC
19.12.08
A.J.
- 32 -
Enable 378/379 Supplemental Mode
Enable 978 Supplemental Mode
Enable Smart Supplemental Mode
UPC/EAN/JAN Suppl
UPC/EAN/JAN Suppl
UPC/EAN/JAN Suppl
UPC/EAN/JAN Supplemental Redundancy
emental Redundancy
emental Redundancy
emental Redundancy
With Autodiscriminate UPC/EAN/JAN Supplementals
Autodiscriminate UPC/EAN/JAN Supplementals
Autodiscriminate UPC/EAN/JAN Supplementals
Autodiscriminate UPC/EAN/JAN Supplementals selected, this option adjusts the number of times a symbol
without supplementals is decoded before transmission. The range is from two to thirty times. Five or above is
recommended when decoding a mix of UPC/EAN/JAN symbols with and without supplementals, and the
autodiscriminate option is selected. The default is set at 10.
Scan the bar code below to set a decode redundancy value. Next, scan two numeric bar codes in Appendix A
Appendix A
Appendix A
Appendix A,
Numeric Bar Codes. Single digit numbers must have a leading zero. To correct an error or change a selection, scan
Cancel from Appendix A.
UPC/EAN/JAN Supplemental Redundancy