MANUAL BCSI-1 REV 1.8 EN.DOC
19.12.08
A.J.
- 46 -
Code 93
Code 93
Code 93
Code 93
Enable/Disable Code 93
Enable/Disable Code 93
Enable/Disable Code 93
Enable/Disable Code 93
To enable or disable Code 93, scan the appropriate bar code below.
Enable Code 93
* Disable Code 93
Set Lengths for Code 93
Set Lengths for Code 93
Set Lengths for Code 93
Set Lengths for Code 93
The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s)
the code contains. Set lengths for Code 93 to any length, one or two discrete lengths, or lengths within a specific
range.
• One Discrete Length
One Discrete Length
One Discrete Length
One Discrete Length - Select this option to decode only Code 93 symbols containing a selected length. Select the
length using the numeric bar codes in Appendix A, Numeric Bar Codes. For example, to decode only Code 93
symbols with 14 characters, scan Code 93
Code 93
Code 93
Code 93 ---- One Discrete Length
One Discrete Length
One Discrete Length
One Discrete Length, then scan 1
1
1
1 followed by 4
4
4
4. To correct an error or
change a selection, scan Cancel
Cancel
Cancel
Cancel from Appendix A.
• Two Discrete Lengths
Two Discrete Lengths
Two Discrete Lengths
Two Discrete Lengths - Select this option to decode only Code 93 symbols containing either of two selected
lengths. Select lengths using the numeric bar codes in Appendix A, Numeric Bar Codes. For example, to decode
only those Code 93 symbols containing either 2 or 14 characters, select Code 93
Code 93
Code 93
Code 93 ---- Two Discrete Lengths
Two Discrete Lengths
Two Discrete Lengths
Two Discrete Lengths, then scan
0
0
0
0, 2
2
2
2, 1
1
1
1, and then 4
4
4
4. To correct an error or change a selection, scan Cancel
Cancel
Cancel
Cancel from Appendix A.
• Length Within Range
Length Within Range
Length Within Range
Length Within Range - Select this option to decode a Code 93 symbol with a specific length range. Select lengths
using the numeric bar codes in Appendix A, Numeric Bar Codes. For example, to decode Code 93 symbols
containing between 4 and 12 characters, first scan Code 93
Code 93
Code 93
Code 93 ---- Length Within Range
Length Within Range
Length Within Range
Length Within Range. Then scan 0
0
0
0, 4
4
4
4, 1
1
1
1, and 2
2
2
2
(single digit numbers must always be preceded by a leading zero). To correct an error or change a selection, scan
Cancel
Cancel
Cancel
Cancel from Appendix A.
• Any Length
Any Length
Any Length
Any Length - Scan this option to decode Code 93 symbols containing any number of characters within the
decoder’s capability.
