MANUAL BCSI-1 REV 1.8 EN.DOC
19.12.08
A.J.
- 5 -
Technical Data
For all BCSi versions:
For all BCSi versions:
For all BCSi versions:
For all BCSi versions:
Housing type:
Stainless steel 1.4301 / AISI 304 (or on request)
Ingress protection:
IP67
Operating temperature range:
-20°C to +60°C (-4°F to 140°F), 15 to 95% rel. humidity, n. cond.
Storage temperature:
-20 °C - +35°C (-4°F to 95°F), 15 to 85% rel. humidity, n. cond.
-20 °C - +60°C (-4°F to 140°F), 15 to 85% rel. humidity, n. cond.
(for one week)
Hazardous areas:
Zone 0, Zone 20, EPL Ga, EPL Da (refer certificates)
Dimensions:
220 mm x 42 mm (8,67” x 1,65”), refer attached drawings
Weight:
typ. 700g (24,7 oz), depending of variant
Classification of install. and use:
Mobile device, hand-held device
Data Interface:
RS232, typ.settings 9600bps, 8 data, 1 stop, no parity, no flow
control
Scan engine:
Bi-focus near 120mm / far 230mm (5” / 9”)
Field of view:
Horizontal: 32.2°, Vertical: 24.5°
Optical Resolution:
640 (H) x 480 (V) pixels (gray scale)
Barcode decode speed:
Linear typ. 100ms or less, 2D typ. 300ms or less
Optical radiation:
Aiming Element (VLD) 650 nm ± 5 nm, less than 35mW
Illumination Element (LED): 635 nm ± 20 nm, less than 35mW
Laser Classification:
CDRH Class II/IEC 825 Class 1 devices
Min. Print Contrast:
Min. 25% absolute dark/light reflectance measured at 650 nm
Ambient Light:
Total darkness to 9,000 ft.candles (96,900Lux)
Symbologies:
1-D Symbology : All major 1D bar codes, e.g. UPC/EAN, Code
128, UCC.EAN128, RSS, Code 39, Code 93, I 2 of 5, Discrete 2
of 5, Codabar, MSI
2-D Symbology: MaxiCode, PDF417, DataMatrix, QR Code, Aztec
& Composite Codes
Postal Codes: US Postnet, US Planet, UK Postal, Australian Postal,
Japan Postal
Refer chapter “Barcodesettings” for details.
Scan decode zone:
Typical performance @23°C (73°F) on high quality symbols in
normal room light for 1D symbology (tested with PDF417):
Near
5 mil: Code 39 - 80% MRD: 8.9 - 17.8 (cm)/ 3.5 - 7 (in)
7.5 mil: Code 39 - 80% MRD: 7 - 19.7 (cm) / 2.75 - 7.75 (in)
13 mil: UPC-A - 80% MRD: 5.7 - 22.2 (cm) / 2.25 - 8.75 (in)
20 mil: Code 39 - 80% MRD: * - 27.9 (cm) / * - 11 (in)
6.7 mil: PDF417 - 80% MRD: 9.5 - 15.2 (cm) / 3.75 - 6.0 (in)
10 mil: PDF417 - 80% MRD: 8.3 - 18.4 (cm) / 3.25 - 7.25 (in)
15 mil: PDF417 - 80% MRD: * - 19.1 (cm) / * - 7.5 (in)
