MANUAL BCSI-1 REV 1.8 EN.DOC
19.12.08
A.J.
- 6 -
Far
5 mil: Code 39 - 80% MRD: 16.5 - 19.1 (cm) / 6.65 - 7.5 (in)
7.5 mil: Code 39 - 80% MRD: 10.8 - 25.4 (cm) / 4.25 - 10 (in)
13 mil: UPC A - 80 % MRD: 7.6 - 40.6 (cm) / 3 - 16 (in)
20 mil: Code 39 - 80% MRD: * - 51.6 (cm) / * - 21.5
10 mil: PDF417 - 80% MRD: 14.6 - 26 (cm) / 5.75 - 10.25 (in)
15 mil: PDF417 - 80% MRD: * - 51.6 (cm) / * - 21.5 (in)
MRD: min. reflectance difference
* = near distance area field of view limited
For BCSi
For BCSi
For BCSi
For BCSi –
––
–C LP, BCSi
C LP, BCSi
C LP, BCSi
C LP, BCSi –
––
–C HP:
C HP:
C HP:
C HP:
Connection:
RS232 intrinsically safe interface (interface X91)
Supply:
via intrinsically safe interface (interface X91)
Length of spiralcable:
typ. 0,5m / 2m (1,64ft / 6,56ft), not extended / extended. Other
lengths on request. Cable fixed mounted. Exchangeable by Gecma
only.
Note (for BCSi-C LP only):
This variant is developed with internal energybuffer to provide the
necessary power for the scanner electronic (duty cycle typ. 5%). A pre
charging of typ. 16h for this internal buffer necessary before first
operation. Typ. dicharging rate when not connected is typ. 15% to
20% per month @ 20°C (68°F).
For BCSi
For BCSi
For BCSi
For BCSi –
––
–RF 10, BCSi
RF 10, BCSi
RF 10, BCSi
RF 10, BCSi –
––
–RF 100:
RF 100:
RF 100:
RF 100:
Connection:
provide wireless RS232 interface via Bluetooth 1.2 (2,4GHz)
specification (transparent RS232 Interface), Class 2 for BCSi –RF
10, Class 1 for BCSi –RF 100
Supply:
via internal battery (charging via interface X92)
not interchangeable.
Battery capacity:
typ. >2000 scans, typ. 36h standby, typ. charging 16h (when
complete discharged), conditions @20°C (68°F), >350 cycles
(IEC61951-2). Charge battery before using.
Discharging rate:
when power down and not used typ. 15% to 20% per month @
20°C (68°F)
RF distances:
max. 10m for BCSi –RF 10 (open field)
max. 100m for BCSi –RF 100 (open field)
Local conditions can affect the RF distances.
Radiated power:
max. 2W
Antenna:
Integrated antenna
Bluetooth type setting:
RS232 interface, accept bound request from remote device,
connectable, discoverable
Bluetooth PIN:
0000
