Technical description
GEDA
®
1500 Z/ZP
Operating Manual
42 / 84
BL076 GB Edition 07.2015
3.3.8
Holder for individual support frames
The bracket can be installed on all platforms as an option for
operation
without roof
.
Loads that are taller than the platform (e.g. scaffolding tubes) can be
transported securely without falling using this holder (1).
The tubes and scaffolding couplings are not included in the scope of
delivery.
Suggestion for a contact frame
Material required:
2 tubes 1.5' in length = approx. 2 m,
1 tube 1.5' in length = approx. 1.6 m and
2 scaffolding couplings
Attach the vertical tubes to
the platform struts using the
special couplings (3).
Fit a crosspiece (2) at an
easily reachable height
(approximately 2 m) using
scaffold couplers.
Clamp the scaffold parts
holder (1) to the crosspiece.
Tools required: Ring or open-
ended spanner AF 22 and
AF 13.
3
2
1
