IMPORTANT SAFEGUARDS
When using your digital multi-function cooker, basic safety precautions should always be followed:
1. Insert the digital multi-function cooker directly into the wall socket as far as possible, and do not share
the same socket with other electrical appliances. Turn off and unplug the plug 10 hours after starting the
machine, check whether the plug and socket are hot or not. If hot, please replace the good socket, to
avoid overheating and burning or causing fire due to bad contact.
2. Don't pull the power cord, to avoid loosening the power cord.
3. Don't put special pot on other cooking stoves for any kind of cooking.
4. Digital multi-function cooker c
an’t be dried at high temperature, otherwise it will affect its life.
5. Don't use other pots to cook directly on digital multi-function cooker.
6. The metal shell will produce high temperature when cooking. Don
’t touch directly with hands.
7. Do not use this pot in humid, high temperature or rough environment.
8. Must always keep the digital multi-function cooker dry and clean, especially the heating plate.
9. The digital multi-function cooker should not be washed directly in water to avoid leakage of electricity.
10. If there is any damage to the electric heater, it should be stopped immediately.
11. The power supply must have a good grounding device.
12. Do not collide the bottom of the pot with the heating plate, so as not to cause poor contact between
them, resulting in damage to the overheating protection.
13. In order to avoid fire alarm, please do not place inflammable items, such as cleaning cloth and adhesive
tape, on or below the digital multi-function cooker.
14. When the digital multi-function cooker is first used, there may be a small amount of smoke, which is a
normal phenomenon. This situation will disappear after the use of the cooker continues.
15. When the pot still contains high temperature liquid (such as boiling water or boiling oil), please be
careful when it needs to be moved to avoid scalding.
16. When there is foreign matter on the surface of the heating plate and the bottom of the pot, it must be
removed, otherwise it will affect the use and damage the electrical components.
17. Do not store in corrosive gas or moist place when not in use.
18. If the power cord is damaged, in order to avoid danger, stop to use and call maintenance department or
similar full-time personnel to fix up.
19. This product is only used in families or similar places.
20. Dry cloth must be used to clean the water droplets and sundries on the bottom of the inner pot and the
surface of the electric heating plate before electrification.
Summary of Contents for AX-D301
Page 1: ......
