BOX CONTENTS
UNPACKING AND SETUP
POWERING ON THE UNIT
5
Make sure the items listed below are included in the box:
• Main Turntable Unit
• Power Adapter
• Instruction Manaul
1 Carefully remove the turntable from the display package and remove all
packing material.
2. Unwind the AC adapter power cord and extend it to its full length.
3. Place the turntable on a stable, level surface in proximity to an AC outlet and
away from any strong magnetic fields.
4 Plug the power cord into your AC outlet.
5. Remove the opaque white plastic stylus cover from the phonograph stylus by
sliding it in the direction of the arrow.
6. Be cautious and gentle when removing this stylus cover, as damage to the
stylus is not covered by warranty.
7. Remove the twist-tie securing the tone arm during the shipment.
8. Release the tone arm lever lock.
1 Connect the AC Adapter to the AC POWER Socket on the back of the
turntable.
2. Press the STANDBY/ON button, the STANDY/ON indicator will turn off and
PHONO mode will power on.
3. When you have finished using the turntable, press the STANDBY/ON button
again and the voice message “POWER OFF” will confirm the turntable is off.
NOTE
The turntable will automatically turn off without further instruction or singal for 15
minutes.
