6
PLAYING RECORDS
PHONOGRAPH RECORDING OPERATION
This turntable is full-sized, belt-driven, and plays 33, 45 and 78 RPM records.
1 To turn the turntable on, press the STANDY/ON button to set the volume to a
low level.
2. Press the PHONO button to turn on phono mode. Please be sure that you
have removed the stylus cover from the stylus and have released the Tone
arm lock.
3. Set the turntable speed switch to the appropriate speed of 33, 45 and 78
RPM. Set the record on the turntable. If you are playing 45 RPM singles,
place the 45 RPM adapter on the center spindle.
4. Slide the AUTO STOP CONTROL switch to choose the auto stop function.
5. When finish playing the song, put the LIFT LEVER gently backward to
yourself, the tone arm gently lifter onto the record. The song will stop playing.
6. At the end of the record, the TONE ARM will stop automatically. Put the LIFT
LEVER gently backward to yourself, the TONE ARM gently lifter onto the
record.
7. Adjust the VOLUME control to set the volume as desired.
8. Press the STANDBY/ON button to turn off the system when you are done.
9. Please keep the dust cover open when playing a record.
1 Place a phono record on the turntable.
2. Plug a USB disk into the USB socket. Press the PHONO-REC button, the blue
LED indicator light will flash, meaning the recording has started.
3. Press the PHONO-REC button again when you are finished recording.
4. Press the USB-MP3 button with the blue light and you will hear the recorded
music from the USB.
NOTE
1 PNONO-REC is only for phonograph recording.
2. PHONO-REC is for recording music from the phono record to a USB disk
device (-FAT32 format only).
