5
Setting up Door bell
1. The door bell can be used by people who need
assistance.
2. The door bell can be fixed on a wall or a door
surround. Drill two holes horizontally, 15mm apart
and place the supplied anchors into the two holes.
Hang the door bell onto the two anchors and then
insert and tighten the screws. Stick the
EMERGENCY CALL sticker over the two holes.
3. The door bell can be stuck onto a door or window
using the supplied strong adhesive tape. Remove the
protective paper from the adhesive tape on the back
of the door bell and stick to the required door or
window.
Wall Mounting
1. Drill two holes horizontally, 96mm apart, and leave the
screws protruding from the wall by 5mm.
2. Hang the base on to the two screws and pull the base
down to lock it on
INSTALLATION
