3
Internal Microphone
Mode Switch
(Microphone/ T-coil)
Balance Adjustment
(Use tool
)
1. The headset is powered by a 3.7V lithium polymer
rechargeable battery which is sealed inside the
headset. This type of battery should last for many
years and has over 300 recharging cycles.
2. We recommend that the battery be charged for about
2 hours
before the system is used for the first time.
3. Place the headset in a charging cradle in the Charger
base. Verify that the
red
LED charging indicator is ON.
When the battery is fully charged a
green
LED turns
on.
NOTE: It is not possible to overcharge the battery. We
recommend that the headset be placed in the charging
cradle when not in use.
INTRODUCTION
Right cradle
charging
Indicator
(Red/Green)
Left cradle
charging
Indicator
(Red/Green)
