7
1. Turn on the headset using the ON/ OFF/ VOLUME
(
) control and adjust the volume.
2.
Set the mode switch(
) to MIC( )
, the built in
microphone allows you to hear all the surrounding
sounds.
3.
Set the mode switch(
) to T(
)
, LoopHEAR
TM
20
can be used in rooms especially equipped with a
magnetic loop (
church/
conference
room
…etc) due to
its “built in T-Coil”. LoopHEAR
TM
20 will receive the
emitted magnetic waves then amplify them
to in your
headsetthe LH20
. You will receive all the benefits of
the “built in T Coil”
in the LH20
.
