SETTING UP
1 - CONNECTING TELEPHONE
The plug at the end of the lead should be connected
to the telephone socket.
Voltages present on the telecommunication network
are classified TNV-3 (Telecommunication Network
Voltage) according to the EN60950 standard.
2 - RINGER SETTING
A switch located underside of the base unit allows the
ringer to be switched
ON
or
OFF
.
Outgoing calls can still be made when the switch is
set to the
OFF
position.
3 - RECALL TIMING
The switch is set to a RECALL timing of 100 ms which
is used in most countries in the EEC.
If you have any problems with the RECALL function,
please change the switch setting to 300 ms and try
again.
If the problem persists, please contact your network
operator.
USING THE TELEPHONE:
1 - ANSWERING INCOMING CALLS
When an incoming call is received, the telephone will
ring. To answer the call lift the handset and speak.
2 - MAKING A CALL
Lift the handset, await the dial tone and dial required
number. On completion of the call, carefully replace
the handset in the cradle.
3 - LAST NUMBER REDIAL
If the telephone number you have called is engaged or if
you want to repeat the call to the number you dialled
previously, lift the handset, await dial tone and press the
REDIAL
button. The previously dialled number will be
AUTOMATICALLY RE-DIALLED.
4 - R, * & # BUTTONS
These are used with the new services provided on
digital exchanges. For details please contact your
network operator.
For product support and help visit our website
at www.geemarc.com
telephone 01707 384438
or fax 01707 372529
