background image

10

Sonic Alert warrants the device against any defect in materials or work-
manship for the period of one year from the date of purchase. Should you 
experience a problem, contact our customer service department . Be sure to 
save your sales receipt as proof of purchase date should you need warranty 
service.
Within a period of one year from purchase date, Sonic Alert will repair or 
replace (our discretion) your device at no cost, if a defect in materials or 
workmanship is found. If we elect to replace your device , we may replace 
it with a new or reconditioned product of the same or similar design. Repair 
or replacement will be warranted for a period of 90 days or the original time 
on the original warranty, whichever is longer. The warranty does not cover 
accidents, negligence or breakage to any parts. This includes shipping dam-
age, failure to follow instructions, misuse, 

fi

re, 

fl

oods, use of incompatible 

accessories, Acts of God or failure in your device service carrier’s line service. 
The product must not be tampered with or taken apart by anyone who is not 
an authorized Sonic Alert  representative. Tampering with the phone will void 
antwritten or implied warranties
Sonic Alert shall not be responsible for loss of time, inconvenience , property 
damage caused by your device or any other accidental or consequential 
damages.
Simply send the 

P-Amp40

 (postpaid) and a copy of your sales slip as proof 

of purchase to:
Sonic Alert Inc., 1050 E. Maple Road, Troy MI 48083

IMPORTANT

 : Your receipt is part of your warranty and must be retained 

and produced in the event of a warranty claim. 

1050 East Maple Rd.

Troy, MI 48083

Ph: 248577 5400 

Fax: 248-577-5433

www.sonicalert.com

UgP-Amp40_En _Ed02

GUARANTEE

Summary of Contents for P-Amp40











Reviews: