1
2
QUICK USER GUIDE
!!! Please refer to our website: www.geemarc.com for an up
to date user guide, as there may be important updates and
changes you need to be aware of !!!
IMPORTANT SAFETY INSTRUCTIONS
When using your equipment, basic safety precautions should
always be followed to reduce the risk of fire, electric shock and
injury, including the following:
1.Do not place this product on unstable shelves, stands, tables
or other surfaces.
2.Do not use the motion extension ringer in the following areas
that may cause deformation, malfunction, or operational
failure:
z
Under direct sunlight.
z
Areas exposed to grease or steam, such as kitchens.
z
Near fire or heating devices.
z
Areas subject to extreme temperature changes, such as next
to air conditioners.
z
Areas with IR-opaque or reflective objects that can block IR
energy that are needed for detection.
z
Areas where the temperature is affected by strong illuminating
objects (such as halogen lights).
SAVE THESE INSTRUCTIONS
WHAT’S IN THE BOX
Your product package contains the following items. Save your
sales receipt and original packaging in the event warranty
service is necessary.
EXTENSION RINGER OVERVIEW
1. Flash LED (white)
z
Flashes when receiving an incoming call, or when the
registered devices are triggered.
2. Loud speaker
3. LED indicators (
)
z
Green
when the extension ringer is powered on.
z
Red
when the battery is low.
z
Amber
while checking signal strength.
4. Side switch Keys
_ Slide to switch between the
ringer volumes
(
low
,
medium
, or
high
).
_Slide to switch between the
alert modes
(
flash only
(
),
melody only
(
),
flash & melody
(
), or
all off
(
)).
_ Slide to switch between three doorbell
melodies
.
5. PAIR button (
)
z
Press and hold
for 5 seconds to enter the pairing mode.
6. Power jack
BEFORE USE
Batteries installation (purchased separately)
1. Push downward to remove the battery compartment cover
at the back.
2. Install three
AA batteries
into the battery compartment,
matching the polarity markings (+ and -) inside the battery
compartment.
Power on the extension ringer
Plug the small end of the power adapter to the power jack on
the extension ringer, and the large end to the wall jack.
Extension
Ringer
Power adaptor
