Troubleshooting
What do I do if .....?
See page
‘00’ flashes
This means the machine’s using its
own OGM1 outgoing message.
If you record a new OGM1, ‘00’ stops
flashing.
6
‘Lo’ flashes
There are no batteries or the batteries
are low.
4
The machine won’t answer calls
♦
Is it plugged into the telephone socket?
7
♦
Is it plugged into the mains and
switched on?
4
♦
Is it switched to answer calls? Press
On/Off
so that the message display
(‘00’ etc) is on.
8
♦
If ‘FL’ is displayed, the memory’s full.
9
The mahine keeps recording (‘_’
keeps flashing) when you pick up
the phone
♦
Press
Stop
. Or press and release the
hang up switch on your phone.
8
What do I do if .....?
See page
Your messages are announced
with the wrong time and day
♦
Press
Skip
to hear the time and day
setting. If it’s wrong, reset the clock.
5
Remote access problems
♦
Are you using a phone with Tone
dialling?
10
♦
Try to use a phone which sends a
tone for as long as you hold down
the button. Most mobile phones
have a ‘long tone’ setting.
10
♦
Did you leave more than 15 seconds
between button presses?
10
♦
Are you using the correct security
code?
10
Tones or announcements are heard
after playing messages
♦
Can be normal but if troublesome,
please contact your telephone
service provider who may be able
to make an adjustment to your
particular telephone line.
8
13
