9
8
Power Reset
Press to reset the circuit if the
TAP switch isn't working.
Wi-Fi Reset
Press and hold to put it in
Wi-Fi pairing mode.
See next page for
Wi-Fi Reset
instructions.
4
Reset and restart, cont.
4
Reset and restart
How do I reset TAP and what does the blinking light mean?
Reset TAP by pressing and holding the
Wi-Fi Reset
(Restart ) button
for 3 seconds until the indicator begins to rapidly flash. The
Wi-Fi Reset
button is located on the bottom right side of the switch (not the
switchplate) labeled “Restart”.
- Reset one time (press and hold) to reach Easy Mode
(Rapidly blinking blue, 2x per second)
- Reset again (press and hold) to reach AP Mode
(Slowly blinking blue, every 3 seconds)
QUICK TIP:
On the TAP Faceplate, the Reset button as the
Power Reset
button and the Restart button is also known as the
Wi-Fi Reset
button.
Solid: Connected
Fast Blink: Easy Mode
Slow blink: AP Mode
On: Switched On
Off: Switch Off
Restart
Reset
Reset
Restart
