3
Setting up the Door Bell
1. The door bell can be carried around by people who
need assistance
2. The door bell can be fixed on the wall or a door frame.
Drill two holes horizontally, 14mm apart. Insert the two
supplied anchors into the two holes. Hang the door bell
onto the two anchors and then insert and tighten the
screws. Finally, stick the blank sticker over the two
holes.
3. The door bell can be stuck onto a door or window
using the supplied strong adhesive tape. Remove the
protective paper from the adhesive tape on the back of
the door bell and then stick to the required door,
window or surface.
Wall Mounting the Chime Unit
1. Drill two holes horizontally, 96mm apart, and leave the
screws protruding from the wall by 5mm.
2. Hang the base on to the two screws and pull the base
down to lock it.
Table Mounting
If you want to mount the unit on the table simply place the
unit into the base cradle, and then place the base cradle
on the table.
INSTALLATION
Summary of Contents for AMPLICALL16
Page 27: ...26 UGAMPLICALL16_EnFrGe_v1 9 ...
