background image

 

NOTE: 
Notes are specific and important points which are informative and are included for further information 
about the particular subject. 

 

CAUTION! 
Cautions are procedures, practices, or specific points of information which, if not carefully followed, may 
result in damage to the machines or equipment or, may lead to minor personal injury. 

 

WARNING! 

Warnings are procedures, practices, or specific points of information which, if not carefully 

followed, may result in serious personal injury—even death—or, may result in severe damage to the 
machinery or equipment. They are preceded by this exclamation diagram. 

INTRODUCTION

 

Preface 

 

This manual will only benefit all of us if you, and others responsible for the operation and maintenance of 
this equipment, review this manual and keep it with the machine where it can be referenced for immediate 
use. 

 

For safety and reliable operation, custom equipment like this machine requires a working understanding 
of the adjustments and principles of operation by the personnel involved. 

 

To order parts, the correct part number, serial number, and model number of the equipment will be 
required. 

 

Throughout this manual, features and appearances may vary from your model. Due to CI (continuous 
improvement), the pictures shown may not depict exactly your machine; however, the concepts are the 
same. 

 

 

In this manual, reference is made to the following terms: 

 

Parts Ordering 

 

Please refer to the machine model number and part number when ordering parts. 

 

Our normal business hours are 8:00 a.m. to 5:00 p.m. USA Eastern Standard Time (EST), Monday 
through Friday. 

Geerpres 

Telephone: 

800-253-0373 

1780 Harvey St. 

Facsimile: 

231-773-8263 

Muskegon MI 49442 

Email: 

sales@geerpres.com

 

 
 
 

The information contained or disclosed by this document is considered proprietary by Geerpres. This document, items, and 
information contained or disclosed herein shall not be used, copied, or reproduced in whole or in part, nor shall the contents be 
revealed in any manner to any person unless written permission is obtained from Geerpres. 

Summary of Contents for UVAIRO 500














Reviews: