background image

 

 

 

SAFETY WARNINGS

 

Read all Safety & Precaution statements throughout this manual. 

Personnel Safety

 

 
 

Operations Safety 

 

All powered equipment can and will be dangerous to you if not operated properly. Be certain you are 
familiar with this machine and its functions before you operate it or perform any maintenance on it. 
Failure to follow safety precautions could result in serious personal injuries, including the possibility of the 
loss of life, equipment damage, or failure, and may void the warranty on your machine. 

 

 

Personnel Responsibilities

 

The personnel responsible for the machine must be familiar with all safety devices installed on the 
machine as well as their use. Do not allow unauthorized personnel to operate or perform maintenance on 
this machine. All personnel involved with the machine must be instructed in the following: 

 

Safety procedures and accident prevention. 

 

Specific safety procedures concerning the machine. 

 

Locations and positions of the operating controls. 

 

Personnel Safety

 

Do not stick your hand, arm, or any other part of your body into the machine while in operation. 

 

 

Hazard Labels

 

Refer to all machine labels that have been placed on the machine to familiarize yourself with the potential 
hazards on the machine. 

 

 

Safety Guarding

 

Do 

not 

operate the UVairo Air Sanitizer without all guards and covers in place. 

 

WARNING! 

DO NOT OPERATE WITHOUT ALL guards and components in place and securely fastened. 

Irreparable damage to your eyes and skin could result! 

Summary of Contents for UVAIRO 500














Reviews: