setting mode.
4.CH buttons:
a. In normal display mode, press and hold to search RF.
5.SNOOZE buttons:
a.In alarm mode,press the button to open snooze mode.
Manually Setting the Time, Date & Units:
1.Press and hold down the "
MODE
" button for 3 seconds the hour
display starts to flash, use “UP” or “DOWN” buttons to set the
correct hour.
2.Press "
MODE
" button to confirm your setting, the minute display
starts to flash, use “UP” or “DOWN” buttons to set the correct
minute.
3.Press "
MODE
" button to confirm your setting, the year display
starts to flash, use “UP” or “DOWN” buttons to set the correct year.
4.Press "
MODE
" button to confirm your setting, the month display
starts to flash, use “UP” or “DOWN” buttons to set the correct
month.
5.Press "
MODE
" button to confirm your setting, the date display
starts to flash, use “UP” or “DOWN” buttons to set the correct date.
6.Press "
MODE
" button to confirm your setting,the DAYLIGHT
SAVING TIME display, use the “UP” or “DOWN”buttons to select
turn on or off the DAYLIGHT SAVING TIME.
7.Press "
MODE
" button to confirm your setting, the TIME ZONE
display,use the “UP” or “DOWN” buttons to select the TIME
ZONE.The TIME ZONE order is:EST AST HAST AKST PST MST
CST.
8.Press "
MODE
" button to confirm your setting, the temperature
Unit starts to flash,use “UP” or “DOWN” buttons to set the correct
temperature Unit.
9.Press "
MODE
" button to confirm your setting and to end the
setting procedures, enter the normal mode.
NOTE
: You will automatically exit settings mode if no buttons are
pressed for 30 seconds. Enter settings mode again at any time by
pressing and holding the MODE button for 3 seconds.
Setting the Alarm:
1.In normal display mode, press
ALARM
button enter alarm
mode.Use “UP” button to open and close alarm.
2.Under the alarm mode,Press and hold the
ALARM
button,the hour display starts to flash, use “UP” or “DOWN”
buttons (press and hold to fast adjust) to set the correct hour.
3.Press and hold the
ALARM
button,the minute display starts to
flash, use “UP” or “DOWN” buttons (press and hold to fast
adjust) to set the correct minute. And press the
ALARM
button
again to exit alarm settings.
4.To turn the alarm ON or OFF, press the
ALARM
button to
enter alarm mode, press the
UP
button to ON or OFF the
alarm. The “ ” symbol should show next to the clock display
when alarm is set to ON. Press the
UP
button again to turn off
the alarm, when the alarm is set to OFF, the“ ”symbol should
not display.
5.When the alarm is in operation it will begin beeping with one
short beep and continue with many short beeps if the alarm
rings longer than 20 seconds. You can snooze the alarm for 5
minutes by pressing the
SNOOZE
button.
Indoor / outdoor temperature
Description of control
1.Alarm icon
2.Symbol Radio Control RCC
3.Time display
4.Display low battery indicator
5.Snooze icon
6.Weekday display
7.Calendar display
8.Outdoor temperature
9.Outdoor sensor signal strength
10.Tendency outdoor temperature
11.Moon phase
12.Indoor temperature
13.In/Outdoor temperature max/min record
14.Sensor low battery indicator
15.Tendency indoor temperature
16.SNOOZE button
17. CH button
18. DOWN/MEM button
GEEVON Digital Wall Clock with Thermometer
Item No.T208614
User Manual
Thank you for purchasing T208614 Digital Wall Clock.
Please take a moment to read this guide
and store it for future reference
19. UP /RCC/ 12/24 button
20. MODE /ALARM button
21. Battery Compartment 3xAAA (batteries not included)
22. Stand bracket
23. Wireless signal indicator (Flashes when data is being sent
to the display unit)
24. Integrated hang hole
25. Compartment 2xAAA batteries (batteries not included)
Package Contents:
1. Display Unit
2. Outdoor Sensor
3. Instructions Manual
Installing or Replacing Batteries:
We recommend using high quality batteries for the best
product performance.Heavy duty or rechargeable batteries are
not recommended. The outdoor sensor requires lithium
batteries in low temperature conditions. Cold temperatures can
cause alkaline batteries to function improperly.
Do not mix old and new batteries. Do not mix alkaline,
standard, and/or rechargeable batteries.
Default settings
1. Default time: 12:00 (Time form: 12H)
2. Default date: 01/01 (Year: 2017, date form: M/D)
3. Default week: SUN
4. Default temperature: °F
5. Default alarm:AM 6:00,default snooze time: 5min.
Display / Keys Details:
There are totally 5 keys for the alarm clock,they are included:
MODE/ALARM, UP/12/24, DOWN/MEM, CH,SNOOZE.
1. MODE/ALARM buttons:
a. Press and hold for 3 seconds during normal mode to enter
setting mode.
b. Press
MODE/ALARM
button during normal mode to enter
alarm mode.
2.UP/RCC/12/24 buttons
a.In normal display mode, press this button to switch 12/24 hour.
b.Press and hold for 3 seconds to turn on or turn off RCC.
c.In alarm mode,press this button to open and close alarm.
d. Press to increase the setting value during setting.
e. Press and hold 3 seconds button for fast adjust during setting
mode.
3.DOWN/MEM buttons:
a.Press the button to display max/min temperature.
b.Press and hold the button 3 seconds to clear the record of
MAX/MIN temperature.
c.Press the button to display tendency in/outdoor temperature icon.
d. Press to increase the setting value during setting.
e. Press and hold 3 seconds button for fast adjust during
