background image

11

WARRANTY

Gefen warrants the equipment it manufactures to be free from defects in material 

and workmanship.

If equipment fails because of such defects and Gefen is notified within two (2) 

years from the date of shipment, Gefen will, at its option, repair or replace the 

equipment, provided that the equipment has not been subjected to mechanical, 

electrical, or other abuse or modifications. Equipment that fails under conditions 

other than those covered will be repaired at the current price of parts and labor in 

effect at the time of repair. Such repairs are warranted for ninety (90) days from 

the day of reshipment to the Buyer.

This warranty is in lieu of all other warranties expressed or implied, including 

without limitation, any implied warranty or merchantability or fitness for any 

particular purpose, all of which are expressly disclaimed.

1. 

Proof of sale may be required in order to claim warranty.

2. 

Customers outside the US are responsible for shipping charges to and from 

Gefen.

3. 

Copper cables are limited to a 30 day warranty and cables must be in their 

original condition.

The information in this manual has been carefully checked and is believed to 

be accurate. However, Gefen assumes no responsibility for any inaccuracies 

that may be contained in this manual. In no event will Gefen be liable for 

direct, indirect, special, incidental, or consequential damages resulting from 

any defect or omission in this manual, even if advised of the possibility of such 

damages. The technical information contained herein regarding the features and 

specifications is subject to change without notice.

For the latest warranty coverage information, refer to the Warranty and Return 

Policy under the Support section of the Gefen Web site at www.gefen.com.

PRODUCT REGISTRATION

Please register your product online by visiting the Register Product page 

under the Support section of the Gefen Web site.

Summary of Contents for DVI FM1500

















Reviews: