25
IP CONTROL
The GefenPRO 16x16 3GSDI Matrix supports IP-based control using an
integrated Web interface. To access this feature, an IP address, subnet, gateway,
and port number need to be set on the 16x16 3GSDI Matrix (
Default IP:
192.168.0.70 Subnet: 255.255.255.0 Gateway: 192.168.0.1 Port: 80
). Consult
the network administrator to obtain the proper IP address and settings for this
product to properly communicate on the network.
The IP control setting can be con
fi
gured via the RS-232 control interface. Once
this has been accomplished, access to the Web Interface is possible. Simply type
the IP address that was assigned to the product in a web browser to access the
View Matrix Status
page.
View Matrix Status
The
Main Page
will display the current status and can also be used to create
routes.
To create a new route, follow the steps below:
1. Select which outputs will display the source by clicking on each check box.
2. Select the radio button of the input that will be routed to each output.
3. Click the SWITCH button to update the new routing con
fi
guration.
This page will automatically refresh every minute. However, at anytime the
“Refresh” button can be pressed to refresh the status of the Matrix.
