5
SENDER UNIT DESCRIPTIONS
1
Status
This LED indicator will slowly blink bright green, indicating that there is a valid
connection between the Sender unit and Receiver unit.
2
Power
This LED indicator will glow bright green, when power is applied to the Sender
unit.
3 DVI
Input
Connect this part of the Sender unit to the DVI source.
4
SC Fiber Connector
Connect an SC-terminated fi ber cable from this SC connector to the
SC-connector on the Receiver unit.
5
5V DC Power Supply Connector
Connect the optional 5V DC power supply to this receptacle only if the source
does not supply enough voltage to power the Sender unit. In most situations,
the power supply will not be required.
