7
RECEIVER UNIT DESCRIPTIONS
1 Local
This LED indicator will glow bright green when the Receiver Unit is switched to
use the Local HDMI input.
2 Select
Switches between the HDMI input on the Sender Unit and the Local HDMI In
port on the Receiver Unit.
3 IR
This IR window receives signals from the Hi-Def source IR remote control. The
IR signals are sent back to the source device, when using an IR Blaster on the
Sender.
4 Power
This LED indicator will glow bright red once power has been applied to the unit.
5
5V DC Out
Connect an optional locking (Gefen part no. CAB-PWR-06LL) or non-locking
(Gefen Part no. CAB-PWR-06NL) power cord to this the included 5 V DC
locking power supply connector to power additional devices.
6 Ext
IR
Connect an IR Extender (Gefen part no. EXT-RMT-EXTIR) cable from this port
to the Hi-Def source to extend the IR control.
7 RS-232
This RS-232 serial port is used to update the Receiver Unit fi rmware.
8 Ethernet
Connects the Receiver Unit to the network device.
9 Link
Connects the Receiver Unit to the Sender Unit using CAT-5 cabling.
10 HDMI
Out
Connect an HDTV display or other output device to this locking HDMI port.
11 Local HDMI In
Connect a secondary Hi-Def source device to this locking HDMI port.
