OPERATING THE 8X8 MATRIX FOR HDMI
25
Routing Sources using the IR Remote Control
Buttons
1 - 8
on the IR remote control correspond to each HDMI input (Input 1 - 8) on the
Matrix. Buttons
A - H
correspond to each HDMI output (Output A - H). To route a source to a
display, press the desired output first, then press the input.
Routing Example: Route Input 4 to Output C
1.
Select Output C by pressing button
C
on the IR Remote Control. The number 3 will
appear in the upper right-hand corner of the LCD display:
2.
Select Input 4 by pressing button
4
on the IR Remote Control. The number 4 will
appear in the lower right-hand corner of the LCD display:
OUT:ABCDEFGH C
IN:33254681 4
Input 4 selected
OUT:ABCDEFGH C
IN:33254681
Output C selected
LED indicates a
button was pressed
