page | 5
Getting Started
Panel Layout
7
IR All (Out)
Connect an IR blaster to this port to send
IR commands to multiple devices.
This port is only active if the unit is
configured with the ELR-POL Output
option.
8
IR All (In)
This port is designed to be used with an
IP-based automation control device.
Connect the IR cable from an IR Emitter
port on the automation control device to
this IR port. This port is only active if the
unit is configured with the ELR-POL Output
option.
9
USB
This mini USB port is used for upgrading
for more information.
10
HDMI Local Out
Connect a local HDTV display to this HDMI
port. This port is useful for monitoring the
currently routed input signal.
11
IEC connector
Connect the included AC power cords
from these power receptacles to available
electrical outlets.
