page | 22
Menu System
Operating the 16x16 Modular Matrix for HDMI w/ HDCP
LCM Contrast Menu
The LCM Contrast Menu is used to adjust the visual intensity (contrast) of the characters
in the front-panel display. The contrast can be set to four different levels of intensity.
The default value is 4.
1. From the
home screen
, press the
Menu
button. The
IP Config
menu will be
displayed.
2. Consecutively press the
Page Up
or
Page Dn
button until the
LCM Contrast
menu
is displayed.
3. Press the
Enter
button to enter the
LCM Contrast
menu.
4. Enter a number between 1 and 4, using the keypad on the front panel. For example,
to set the contrast to 1, press button
1
on front panel. Once the desired button is
pressed, the value will appear in the display and the setting will take effect. If another
setting is desired, enter a number between 1 and 4 to see the effect.
5. Press the
Enter
button to accept the changes. The display will indicate “OK”.
6. After a few moments, the
home screen
will be displayed.
1. IP CONFIG
3. LCM CONTRAST
3a. contrast:
range: 1-4
3a. contrast: 1
range: 1-4
3a. contrast: 1
range: 1-4 OK
