page | 19
IP Configuration Menu
The 16x16 Modular Matrix for HDMI w/ HDCP can be controlled using the built-in Web
interface, Telnet, or UDP protocols. In order to use these communication methods, the IP
settings of the matrix must be set accordingly. The IP Configuration menu displays
the current IP address, net mask, and gateway address for the matrix.
1. From the
home screen
, press the
Menu
button. The
IP Config
menu will be
displayed.
2. Press the
Enter
button to enter the
IP Config
menu. The current IP address of
the matrix will be displayed.
GEFEN
16x16 MATRIX
Operating the 16x16 Modular Matrix for HDMI w/ HDCP
Menu System
NOTE:
Depending upon the network, all related IP, Telnet, and UDP
settings will need to be assigned. IP settings cannot be changed
using the front-panel buttons and must be configured using the
RS-232 / IP command set. See
for
more information.
1. IP CONFIG
1a. IP address:
192.168.1.239
Enter
Menu
