page | 24
Operating the 16x16 Modular Matrix for HDMI w/ HDCP
Routing a Source to an Output
Using the Front Panel Buttons
The following example illustrates how to route a source to an output. An input may be
routed to a single or multiple outputs. Multiple inputs cannot be routed to a single output.
1. Press the
In / Out
button on the front panel.
2. The front panel display will indicate that routing mode is active.
3. Select an input (1 - 16) using the numerical keys on the front panel. For this example,
we will route Input 15 to Output 12. Enter the input by pressing buttons 1 and 5.
If an incorrect value is entered by accident, use the ← button to delete the last
number entered.
port select
IN:
port select
IN: 15
port select
IN:
In / Out
Enter
Routing Basics
