page | 32
Saving a Routing Preset
Using the Front Panel Buttons
The 16x16 Modular Matrix for HDMI w/ HDCP allows routing (and masking) states to be
saved to internal non-volatile memory. Each routing state can be recalled at a later time.
Even if the matrix is powered OFF, the presets will be retained in memory.
1. Press the
Save
button on the front panel.
2. The display will show the following:
3. Select a preset (1 - 8) by using the numerical keys on the front panel. For this
example, we will save the current routing status to Preset 2 by pressing button
2
.
4. Press the
Enter
button to save the current routing state to the preset. The front-panel
display will indicate that the preset has been saved.
5. After a few moments, the
home screen
will be displayed.
GEFEN
16x16 MATRIX
Routing Basics
Operating the 16x16 Modular Matrix for HDMI w/ HDCP
save to
no: (1-8)
save to
no: 2 (1-8)
save to
no: 2 OK (1-8)
Save
