page | 11
The On-Screen Display
Using the HDMI and DVI to 3GSDI Scaler
Moving Around in the OSD
Use the
A
/
D
buttons on the IR remote control unit to move left and right between each
of the tabs. Once the desired menu is selected, press the
S
/
W
buttons to access each
feature within the menu.
Most of the submenus have an ► symbol, indicating that there are additional options.
If one of these menus is selected, it will automatically be expanded to show all the options.
Some submenus have check marks (as shown below), requiring the feature to be enabled
or disabled. In this case, select the item using the arrow keys, then press the ENTER key
to select then enable or disable the feature.
