READ THESE NOTES BEFORE INSTALLING
OR OPERATING THE CAT5•9500HD SYSTEM
•
Use industry standard Category 5e (CAT-5e) cable to operate the CAT5•9500HD
system.
•
Please connect all the cables between the computer and the CAT5•9500HDS before
power up the CAT5•9500HDS unit.
•
The CAT5•9500HD units are housed in a metal box for better RF shielding.
CONNECTING AND OPERATING THE CAT5•9500HD
2
How to Connect the CAT5
•
9500HD Extender to your devices
1
Connect the supplied cables from the computer outputs into the CAT5•9500HD Sender
unit inputs. Only the peripherals being extended need to be connected.
2
Connect the cable from your display (monitor or projector) into the DVI out of the
CAT5•9500HD Receiver unit.
3
Connect the cables from your peripherals into their respective outputs on the
CAT5•9500HD Receiver unit.
4 Connect two CAT-5e cables for video and USB extension on the CAT-5 Video and
CAT-5 DDC channel. Two CAT-5e cables are required for video extension.
5 Connect one CAT-5e cable for audio extension and another CAT-5e for PS/2 and
RS-232 extension.
6
Plug the 5VDC power supplies into the CAT5•9500HD Sender and Receiver unit.
