background image

iii

Gefen warrants the equipment it manufactures to be free from defects in material and 

workmanship.

If equipment fails because of such defects and Gefen is notified within two (2) years from 

the date of shipment, Gefen will, at its option, repair or replace the equipment, provided 

that the equipment has not been subjected to mechanical, electrical, or other abuse or 

modifications. Equipment that fails under conditions other than those covered will be 

repaired at the current price of parts and labor in effect at the time of repair. Such repairs 

are warranted for ninety (90) days from the day of reshipment to the Buyer.

This warranty is in lieu of all other warranties expressed or implied, including without 

limitation, any implied warranty or merchantability or fitness for any particular purpose, all of 

which are expressly disclaimed.

1.  Proof of sale may be required in order to claim warranty.
2.  Customers outside the US are responsible for shipping charges to and from Gefen.
3.  Copper cables are limited to a 30 day warranty and cables must be in their original 

condition.

The information in this manual has been carefully checked and is believed to be accurate. 

However, Gefen assumes no responsibility for any inaccuracies that may be contained 

in this manual. In no event will Gefen be liable for direct, indirect, special, incidental, or 

consequential damages resulting from any defect or omission in this manual, even if 

advised of the possibility of such damages. The technical information contained herein 

regarding the features and specifications is subject to change without notice.

Warranty Information

Summary of Contents for DVI Detective















Reviews: