RS-232 COMMANDS
#FADEFAULT Function
The #FADEFAULT function will reset the Switcher to the default routing settings.
Syntax:
#fadefault
Parameters:
None
#IRRMTADD Command
The #IRRMTADD sets the IR channel. The IR channel for the Switcher and the
IR Remote Control Unit must be the same.
Syntax:
#irrmtadd param1
Parameters:
param1
State
[0 - 3]
Value
Meaning
0
IR channel 0
1
IR channel 1
2
IR channel 2
3
IR channel 3